FT-7900E Dual Band FM Mobile Transceiver

 

High Power Output 
Boasting a big 50 Watts of power output on 144 MHz, and 40 Watts on 430 MHz, the FT-7900E also includes provision for three lower power levels, so you never have to use more power than you really need. The power level is stored in regular and Hyper Memory registers, too 
Wide Receiver Frequency Coverage 
The FT-7900E provides receiver coverage from 108 to 520 MHz, and 700 to 999.99 MHz (cellular blocked), so you have available a wide range of monitoring excitement, including AM Aircraft, Public Safety, Government, Business, and, of course, Amateur communications. The synthesizer steps appropriate for the operating band are automatically selected, too! 
Large LCD Display 
The large backlit LCD on the FT-7900E ensure excellent visibility 
One-Touch 
Five front panel keys allow complete transceiver configuration status to be stored for convenient one-touch recall. So you can set up favorite frequencies in each operating band, including the receive-only bands, and then recall them with a single touch of a button! 
Over 1000 Memory Channels 
The FT-7900E’s incredible memory channel capacity includes registers for over 1000 channels, each capable of storing a 6-character Alpha-Numeric label. And the memories may be stored in any of the 20 available memory groups; a particular memory channel may also be stored in multiple groups, if desired. 
YSK-7800 Remote Mounting Kit (option) 
Using the optional YSK-7800 Separation Kit, which contains both cabling and a bracket for the remote front panel, you can mount the FT-7900E’s front panel on the vehicle’s dash board, then stow the radio’s body under the seat or in some other convenient, out-of-the-way location. The cables are approximately 20 feet (6 m) in length. 
WiRES™ Internet Linking Capability 
The FT-7900E’s DTMF signaling capability includes provision for easy access to Yaesu’s WiRES™ (Wide-coverage Internet Repeater Enhancement System) Internet linking nodes, as well as other linking systems that require a DTMF string for access.

 

 

 

Package Contents

• FT-7900 Transceiver
• MH-48A6J DTMF Microphone
• MMB-36 Mobile Mounting Bracket
• DC Power Cord with Fuse
• Spare Fuse (32V 15A)
• Operating Manual
• Warranty Card
• Note: Specifications are subject to change without notice, and are guaranteed within the 144 and 430 MHz Amateur Bands only. Frequency ranges will vary according to transceiver version; check with your dealer.
  
  

  Specifications	FT-7900E
  GENERAL
  Frequency Range
  RX	108.000 - 520.000 MHz
  	700.000 - 999.990 MHz
  TX	144.000 - 146.000 MHz
  	430.000 - 440 000 MHz
  Channel Steps	5/10/12.5/15/20/25/50/100 kHz
  Modes of Emission	F2A, F2D, F3E
  Antenna Impedance	50Ω, unbalanced (Antenna Duplexer Built-in)
  Frequency Stability	±5ppm @ -10ºC to +60ºC
  Operating Temperature Range	-20ºC to +60ºC
  Supply Voltage	13.8 VDC (±15%), Negative Ground
  Current Consumption (approx.)	RX: 0.5A (Squelched)
  	TX: 8.5A (144 MHz, 50W)
  	9.0A (430MHz, 45W)
  Case Size (W x H x D, mm)	140 x 41.5 x 168 (w/o knobs & connectors)
  Weight (approx.)	1 kg
  TRANSMITTER
  Output Power	5/10/20/50 W (144 MHz)
  	5/10/20/45 W (430 MHz)
  Modulation Type	Variable Reactance
  Maximum Deviation	±5 kHz, ±2.5 kHz
  Spurious Radiation	At least -60dB below
  Microphone Impedance	2 kΩ
  DATA Jack Impedance	10 kΩ
  RECEIVER
  Circuit Type	Double-conversion Superheterodyne
  Intermediate Frequencies	45.05 MHz / 450 kHz
  Sensitivity	0.2µV for 12dB SINAD (137 - 150 MHz, FM)
  (see data sheet for other readings)	0.2µV for 12dB SINAD (420 - 520 MHz, FM)
  Squelch Sensitivity	Better than 0.16µV
  Selectivity (-6dB / -60db)	12kHz / 30kHz
  Maximum AF Output	2W @ 8Ω for 10% THD
  AF Output Impedance	4 - 16 Ω