MANSON KPS-6402 Laboratory Power Supply 1-32V DC / 0-20 A

Shop Home > AMATEUR AVIATION CB MARINE PMR RADIO > POWER SUPPLIES > LABORATORY POWER SUPPLIES

MANSON KPS-6402 Laboratory Power Supply 1-32V DC / 0-20 A
  • MANSON KPS-6402 Laboratory Power Supply 1-32V DC / 0-20 A
  • MANSON KPS-6402 Laboratory Power Supply 1-32V DC / 0-20 A

  • MANSON KPS-6402 Laboratory Power Supply 1-32V DC / 0-20 A

  • £298.00

:  at  £298.00  each


MANSON KPS-6402 Laboratory Power Supply 1-32Volt DC / 0-20 Amp 

Remote Power Supply with Ethernet Networking and DC Waveform Generator 

The KPS Series of remotely controllable switching power supplies allow testing and verification because its versatile 10-step waveform generator can simulate common electronic test conditions , In addition to the built-in USB interface, an optional Ethernet interface allows the user to configure, operate and display basic settings of the switch mode power supply via LAN or the Internet.
The KPS series uses the SCPI (Standard Commands of Programmable Instruments) syntax, making it easy to integrate into electronic test systems. Two 4-digit displays offer a resolution of 10mV or 10mA. Three freely programmable voltage and current presets can be stored and recalled via the front panel buttons. User adjustable output current and voltage limits protect the connected loads from damage due to overvoltage and current. The on / off button for the output and the locking button for the controls allow safe and convenient operation. The analog remote control of voltage, current and on / off switching of the output provides flexibility in the operation of the switching power supply. For laboratories, universities,

Programmable via USB or LAN remote control (with optional LAN card) 
10 step waveform generator 
4-digit digital voltmeter and ammeter 
3 freely programmable memories for voltage and current 
adjustment User-dependent voltage and current limit setting 
analogue remote control for voltage, current and connection of the output 
output input Off and key lock 
Rotary encoder Coarse and fine adjustment 
Silent fan temperature controlled from 0 to full load 
Self Diagnosis Check LED display and fan check 
Active PFC and High Power efficiency 
Safety circuits such as overload protection, overvoltage (OVP), over temperature and short circuit protection protect the power supply from damage
Upper limits for the output voltages and currents are programmable, which prevent incorrect operation during normal operation. 

Technical data 

operating voltage
  • 90 ... 264 volts 50 Hz.
output voltage
  • Adjustable 1-32 Volt DC
output current
  • 0 - 20 amps adjustable
Spannungsausreglung
  • Load (10 ... 90% rated current) <50mV / supply (180 ... 264V) <20mV
Stromausreglung
  • Load (10 ... 90% rated current) <100mV / supply (180 ... 264V) <50mV
ripple
  • <5mV peak-peak <50mV
switching frequency
  • 65 ... 85 kHz
Overvoltage protection
  • O / P 10V set voltage + 1V / 10V set voltage x 100%
Measuring accuracy Show
  • Volt / Amp 4-digit LED display (0.2% + 3 digits)
Input current max. Load at 230 volts
  • 3.5 amps
efficiency
  • > 85%
Power factor correction
  • > 95
cooling
  • temperature controlled fan
protection circuits
  • Overload, short circuit in continuous current, output tracking, overvoltage, over temperature,
Standard Interface
  • USB 2.0
Optional interface
  • Ethernet
Waveform cycle programming
  • 10-step waveform generator, max. Savable 999 cycles
Dimensions W x H x D
  • 200mm x 90mm x 292mm
Weight
  • 3 kg


Included:

  • Manson KPS-6402 power supply
  • AC power cable with safety plug 
  • USB driver and PC control software
  • USB cable
  • DC cable with rectangular safety plug and mounting clamp 
  • Instructions in German and English 

    EAN.:4250158711235 
    Weight: 3 kg